IPN-Pro Remote Display Combines Full-Featured Charge Controller and Battery System Monitoring! The IPN-Pro Remote combines full-featured charge controller monitoring and battery system monitoring into a single user friendly remote display. A bright crisp backlit LCD display with plain English language text and three simple front panel keys is extremely easy to use. With the IPN-Pro Remote you no longer have to guess how much battery capacity remains. A high accuracy calculation of remaining battery capacity compensates for a variety of factors including charge/discharge current, battery size, type, temperature and how the battery was brought back to full charge. It even learns from past battery behavior to continuously improve accuracy! The IPN-Pro Remote also monitors and controls BlueSky Energy’s IPN based charge controllers. It can monitor both the combined total and individual status of up to eight IPN charge controllers on a single IPN network. Depending on the particular charge controller model, certain additional parameters or settings can be accessed or modified with the IPN-Pro Remote. By combining an advanced battery system monitor and charge controller display into a single unit, the IPN-Pro Remote eliminates the need for a separate battery monitor. It also simplifies installation and eliminates the headaches of trying to setup and synchronize separate charge controller and battery monitor systems.     Back to Solar Boost 2512i & 2512iX

IPN-Pro Remote Specifications

Current Shunt	Requires current shunt in battery negative line, 50mV / 500 amp
Battery Ammeter	Range 773.3A FS * Accuracy 5% FS
Other Meters	Accuracy / range of other volt/amp meters determined by IPN charge controller
Battery Size	20 - 10000 Amp-hours
Power Consumption	0.25W Typical * 1.0W Typical with backlight on
Remaining Battery Capacity	0 - 100% in 1% increments, based on charge/discharge amp-hour counting, self discharge rate and self tuning charge efficiency. Appropriate factors temperature compensated
Amp-hours from Full	0 to 16,383 Amp-hours
Full Charge Determination	Automatically matched to IPN charge controller setup. Adds ability to determine full charge based on net battery current matched to battery size in amp-hours
Total Charge Amp-hours	0 to 16,383 Amp-hours
Lifetime Battery Amp-hours	0 to 9,999,999 Amp-hours
Days Since Full Charge	0 to 255 Days
Days Since Equalize	0 to 255 Days
Backlight	Can be set to ON, OFF or AUTO (On for 1 minute after key press)
Panel Dimensions	4-1/2" H x 4-1/2" W x 1-1/2" D (11.4cm x 11.4cm x 3.8cm) Fits standard duplex wall mount box.
Communication, Power & Cabling	Receives power and communication from IPN compatible charge controller via 4-pin telephone cable Charge controller cable length to 500' (152m) with proper cabling. Current shunt connection via twisted pair cable. Length to 300' (91.5m). RS-232 interface available with R-232 option
Environmental	-40oC to +40oC, 10 - 90% RH non-condensing