Solar Boost 2512i Specifications
Full charge can be based on net charge current matched to battery amp-hours)
and Dimensions
Input/Output ammeters, 30.0 +-0.50% FS
| Output Current Rating | 25 Amp maximum, automatic 25 Amp output current limit |
| Nominal Battery Voltage | 12VDC |
| PV Input voltage | 35VDC maximum |
| Power Consumption | 0.35W Typical standby * 1.0W Typical charge on |
| Charge Algorithm | 3-stage Bulk/Acceptance /Float * Charge time in Acceptance fixed at 2 hours (Range 0-10 hours) Full charge can be based on net charge current matched to battery amp-hours) |
| Acceptance Voltage | 14.4VDC Fixed Value (10.0 - 20.0VDCnote) |
| Float Voltage | 13.2VDC Fixed Value (10.0 - 20.0VDCnote) |
| Power Conversion Efficiency | 97% @ 28 Volt 24 Amp output |
| Physical Configuration and Dimensions |
Open frame construction with conformal coated electronics mounted to rear of 5.3" x5.3" (13.5cm x 13.5cm) clear anodized aluminum face plate. Electronics extend 1.9" (4.83cm) behind front panel. Mounts into standard 4-11/16 (11.9cm) square electrical box which is included, Raco p/n 8257 or equivalent. |
| Analog Input Accuracy / Range | Battery and PV voltmeters, 35.0VDC +-0.50% FS Input/Output ammeters, 30.0 +-0.50% FS |
| Communication | IPN Network interface for IPN displays only. Full IPN interface to allow multicontroller coordination not provided |
| Environmental | -40oC to +40oC, 10-90% RH non-condensing |
| Equalization Voltage | 15.2VDC Fixed Value (range 10.0 - 40.0VDCnote * automatic Fixed at 2 hours each 30 days, may be disabled (time and day settings variable, or equalize can be manually actuated) |
| Auxiliary Output Function | Single output field configurable as either: 25 Amp load controller - 0 - 2 Amp auxiliary battery charger |
| Auxiliary Battery Charge | 2 Amp typical, same voltage as primary battery |
| Load Control | 25 Amp maximum; ON @ 12.6VDC / OFF @ 11.5VDC |
| Temperature Compensation | Optional temperature sensor adjusts charge voltage setpoints based on measured battery temperature -5.00mV/oC/cell correction factor sensor range -60oC to +80oC |
| Auxiliary Battery Voltage | Auxiliary battery voltmeter, 35VDC |
| Communication | Complete IPN Network interface. Allows up to 8 IPN capable controllers to set up and operate as a single machine, share a common battery temperature sensor, and share an IPN-Remote or IPN-ProRemote display. Simple twisted pair cable interface with no special communication hardware required. |
| Back to SB2512i and SB2512iX page |
