Solar Boost 3024i Specifications
-5.00mV/oC/cell correction factor
sensor range -60oC to +80oC
PV voltmeter, 60.0VDC +-.50% FS
Input/Output ammeters, 35.0 +-0.50% FS
| Output Current Rating | 30 Amp maximum |
| Nominal Battery Voltage | 12 / 24VDC |
| PV Input voltage | 57VDC maximum |
| Power Consumption | 0.35W Typical standby * 1.0W Typical charge on |
| Charge Algorithm | 3-stage Bulk/Acceptance /Float * Full charge can be based on net charge current matched to battery amp-hours) |
| Acceptance Voltage | 14.4VDC Fixed Value (10.0 - 40.0VDCnote) |
| Float Voltage | 13.4VDC Fixed Value (10.0 - 40.0VDCnote) |
| Equalization Voltage | 15.2VDC Fixed Value (range 10.0 - 40.0VDCnote * automatic or manual operation |
| Auxiliary Output Function | Single output field configurable as either: 25 Amp load controller - 0 - 2 Amp auxiliary battery charger |
| Auxiliary Battery Charge | 2 Amp typical, same voltage as primary battery |
| Load Control | 25 Amp maximum; ON @ 12.6VDC / OFF @ 11.5VDC |
| Temperature Compensation | Optional temperature sensor adjusts charge voltage setpoints based on measured battery temperature -5.00mV/oC/cell correction factor sensor range -60oC to +80oC |
| Power Conversion Efficiency | 97% @ 28 Volt 24 Amp output |
| Cabinet Dimensions | 6-7/8" H x 6-5/8"W x 3-3/8" D (17.4cm x 16.8cm x 8.59cm) |
| Analog Input Accuracy / Range | Battery voltmeters, +40.0VDC +-0.50% FS PV voltmeter, 60.0VDC +-.50% FS Input/Output ammeters, 35.0 +-0.50% FS |
| Communication | Blue Sky Energy proprietary IPN Network interface. Allows up to 8 IPN capable controllers to set up and operate as a single machine, share a common battery temperature sensor, and share an IPN-Remote or IPN-ProRemote display. Simple twisted pair cable interface with no special communication hardware required. |
| Environmental | -40oC to +40oC, 10-90% RH non-condensing |
| Back to SB3024i page |
