SCAD Profile Solo
The SCAD Profile Solo tank monitor attaches its
sensor to the outside of your plastic or composite tank. Using a
foil tape (2in x 3.5in), it connects to the Solo display
panel that you can locate anywhere on board. At a glance you
will know your holding tank's level of fill.
Installation is easy since the tank sensor tapes mount to the
outside of your plastic holding tank and can't be fouled. Just cut
the tape to the vertical length of your tank and set the empty and
full calibration points on the Solo's monitor panel. Calibration is
kept even when power is removed.
Once the system is installed, it will automatically check the tank
level periodically. When the tank is full, a red LED will illuminate
indicating the full tank or you can check the level at any time by
pressing the "Read" button, which will illuminate the bar graph
indicating level of full.
The SCAD Profile Solo tank monitor uses only .001
Amps when powered on.
An optional sensor for metal tanks is also
available. The clog-proof floatless sensor fits inside a metal
tank and easily installs by simply cutting to length the sensor to
adapt to any size tank.
The tank monitor is also compatible with nearly all sensor types
available on the market today making it easy to retrofit into an
existing tank system or to install new.
This display panel also features an optional tank full light which
can serve as a “Do Not Flush” light when installed in your bathroom.
Basic Features:
-
Panel will monitor liquid level on 1 tank.
-
Panel size: 3.75" x 2"
-
Data is displayed as a 4 position LED bar
graph..
-
Simple to install, setup and operate.
-
Compatible with both capacitive level sensors
and 240-33 Ohm float sensors.
-
Features exclusive EZ-Profile software algorithm
which corrects for odd tank shape and sensor type.
-
Optional autonomous monitoring and tank full
alert light
